MENU

お電話でのお問合せはこちらから

TEL: 022-795-4316

Publications

長坂　徹也（Tetsuya Nagasaka）

1)                 萬谷志郎，井口泰孝，長坂徹也：溶融ウスタイトの水素による還元反応速度, 鉄と鋼, Vol.70 (1984), No.14, 1689-1696.

2)                 長坂徹也，井口泰孝，萬谷志郎：溶融ウスタイトのCOによる還元反応速度, 鉄と鋼, Vol.71 (1985), No.2, 204-211.

3)                 S. Ban-ya, F. Ishii Y. Iguchi and T. Nagasaka ：Rate of Nitrogen Desorption from Liquid Iron-Carbon and Iron-Chromium Alloys with Argon, Metallurgical Transactions B, Vol.19B (1988), No.2, 233-242.

4)                 長坂徹也、井口泰孝、萬谷志郎：溶融酸化鉄のCOによる還元反応速度に及ぼす添加物の影響, 鉄と鋼, Vol.75 (1989), No.1, 74-81.

5)                 王　潮，平間　潤，長坂徹也，萬谷志郎：Fe-S-C ３元系融体の相平衡, 鉄と鋼, Vol.77 (1991), No.3, 353-360.

6)                 王　潮，長坂徹也，日野光兀，萬谷志郎：FeS-Na2S系フラックスと炭素飽和溶鉄間の銅の分配平衡, 鉄と鋼, Vol.77 (1991), No.4, 504-511.

7)                 王　潮，長坂徹也，日野光兀，萬谷志郎：FeSフラックスと炭素飽和溶鉄間の銅分配に及ぼすアルカリ及びアルカリ土類金属硫化物添加の影響, 鉄と鋼, Vol.77 (1991), No.5, 644-651.

8)                 C. Wang, T. Nagasaka, M. Hino and S. Ban-ya：Activities of Tin and Antimony in Liquid Fe-S Alloy Saturated with Carbon, ISIJ International, Vol.31 (1991), No.11, 1336-1344.

9)                 長坂徹也、萬谷志郎：溶融酸化鉄の還元速度, 鉄と鋼, Vol.78 (1992), No.12, 1753-1767.

10)              S. Ban-ya, M. Hino and T. Nagasaka：Estimation of Water Vapor Solubility in Molten Silicates by Quadratic Formalism Based on the Regular Solution Model, ISIJ International, Vol.33 (1993), No.1, 12-19.　

11)              T. Nagasaka and R. J. Fruehan：Reaction Kinetics of CO2-H2O Gas Mixtures with Liquid Fe-C Alloys, ISIJ International, Vol.34 (1994), No.3, 241-246.

12)              日野光兀、王　社斌、長坂徹也、萬谷志郎：溶鉄中亜鉛の蒸発速度, 鉄と鋼, Vol.80 (1994), No.4, 300-305.

13)              T. Nagasaka and R. J. Fruehan：Kinetics of the Reaction of H2O Gas with Liquid Iron, Metallurgical and Materials Transactions B, Vol.25B (1994), No.2, 245-253.

14)              Y. Zhang, T. Nagasaka, A. W. Cramb and R. J. Fruehan：Equilibrium Values for the Dissolution of Solid Copper into FeS-Na2S Mattes, Metallurgical and Materials Transactions B, Vol.25B (1994), No.2, 306-308.

15)              日野光兀、樋口謙一、長坂徹也、萬谷志郎：FeO･Cr2O3-MgO･Cr2O3スピネル固溶体の成分活量, 鉄と鋼, Vol.80 (1994), No.7, 501-506.

16)              A. Sharan, T. Nagasaka and A. W. Cramb：Surface Tensions of Liquid Fe-Cr and Fe-Cr-N Alloys, Metallurgical and Materials Transactions B, Vol.25B (1994), No.4, 626-628.

17)              日野光兀、樋口謙一、長坂徹也、萬谷志郎：FeO･Cr2O3-MgO･Cr2O3-MgO･Al2O3系スピネル固溶体の成分活量, 鉄と鋼, Vol.80 (1994), No.11, 825-830.

18)              A. Sharan, T. Nagasaka and A. W. Cramb：Densities of Liquid Fe-Ni and Fe-Cr Alloys, Metallurgical and Materials Transactions B, Vol.25B (1994), No.6, 939-942.

19)              K. Sekino, T. Nagasaka and R. J. Fruehan：Kinetics of the Reaction of CH4 Gas with Liquid Iron, Metallurgical and Materials Transactions B, Vol.26B (1995), No.2, 317-324.

20)              M. Hino, T. Nagasaka and S. Ban-ya：Activity of Phosphorus in a-Fe and Phase Diagram of Fe-Fe2P System Above 1273K, Zeitschrift für Metallkunde, Vol.88 (1997), No.11, 938-944.

21)              長坂徹也、日野光兀：減圧下における炭素飽和溶融Fe-Sn-S合金からのSnSの蒸発速度, 資源と素材, Vol.113 (1997), No.12, 1101-1105.

22)              M. Hino, K. Higuchi, T. Nagasaka and S. Ban-ya：Thermodynamic Estimation on the Reduction Behavior of Iron-Chromium Ore with Carbon, Metallurgical and Materials Transactions B, Vol.29B (1998), No.2, 351-360.

23)              堤　康一、大武淳一、長坂徹也、日野光兀：Li2O-SiO2, Na2O-SiO2, Na2O-CaO-SiO2系ガラスの結晶析出挙動, 鉄と鋼, Vol.84 (1998), No.6, 464-469.

24)              H. Oyamada, T. Nagasaka and M. Hino：Activity Measurement of the Constituents in Liquid Cu-Al Alloy with Mass-Spectrometry, Materials Transactions, JIM, Vol.39 (1998), No.12, 1225-1229.

25)              吉田　孝、長坂徹也、日野光兀：減圧下における溶銅中の亜鉛、鉛の蒸発速度, 日本金属学会誌, Vol.63 (1999), No.2, 167-173.

26)              M. Hino, T. Nagasaka and T. Washizu：Phase Diagram of Fe-Cu-Si Ternary System above 1523K, Journal of Phase Equilibria, Vol.20 (1999), No.3, 179-186.

27)              M. Hino, T. Nagasaka, A. Katsumata, K. Higuchi, K. Yamaguchi and N. Kon-no：Simulation of Primary Slag Melting Behavior in the Cohesive Zone of Blast Furnace, Considering the Effect of Al2O3, FetO and Basicity in the Sinter Ore, Metallurgical and Materials Transactions B, Vol.30B (1999), No.4, 671-682.

28)              K. Tsutsumi, T. Nagasaka and M. Hino：Surface Roughness of Solidified Mold Flux in Continuous Casting Process, ISIJ International, Vol.39 (1999), No.11, 1150-1159.

29)              K. Sekino, T. Nagasaka and R.J. Fruehan：Kinetics of the Reaction of C2H6, CH4-O2 and CO-CO2-O2 Gases with Liquid Iron, ISIJ International, Vol.40 (2000), No.4, 315-321.

30)              T. Itoh, T. Nagasaka and M. Hino：Equilibrium between Dissolved Chromium and Oxygen in Liquid High Chromium Alloyed Steel Saturated with pure Cr2O3, ISIJ International, Vol.40 (2000), No.11, 1051-1058.

31)              K. Fujii, T. Nagasaka and M. Hino：Activities of Constituents in Spinel Solid Solution and Free Energies of Formation of MgO, MgO･Al2O3, ISIJ International, Vol.40 (2000), No.11, 1059-1066.

32)              M. Hino, T. Nagasaka and R. Takehama：Activity Measurement of the Constituents in Liquid Cu-Mg and Cu-Ca Alloys with Mass Spectrometry, Metallurgical and Materials Transactions B, Vol.31B (2000), No.5, 927-935.

33)              T. Nagasaka, M. Hino and S. Ban-ya：Interfacial Kinetics of Hydrogen with Liquid Slag Containing Iron Oxide, Metallurgical and Materials Transactions B, Vol.31B (2000), No.5, 945-955.

34)              T. Washizu, T. Nagasaka and M. Hino：Viscosity of Liquid Fe-Cu-Si Alloy Formed in New Melting Process for Domestic Waste Incineration Residue, Materials Transactions, Vol.42 (2001), No.3, 471-477.

35)              T. Miki, N. Ogawa, T. Nagasaka and M. Hino：Activity Measurement of the Constituents in Molten Ag-In-Sn Ternary Alloys with Mass Spectrometry, Materials Transactions, Vol.42 (2001), No.5, 732-738.

36)              T. Yoshida, T. Nagasaka and M. Hino：Effect of Oxygen on the Evaporation Rate of Lead from Liquid Copper under Reduced Pressure, ISIJ International, Vol.41 (2001), No.7, 706-715.

37)              M. Kimoto, T. Itoh, T. Nagasaka and M. Hino：Thermodynamics of Oxygen in Liquid Fe-Cr Alloy Saturated with FeO·Cr2O3 Solid Solution , ISIJ International, Vol.42 (2002), No.1, 23-32.

38)              T. Itoh, T. Nagasaka and M. Hino：Phase Equilibria between SiO2 and Iron-Chromite Spinel Structure Solid Solution, and Deoxidation of Liquid Fe-Cr Alloy with Silicon, ISIJ International, Vol.42 (2002), No.1, 33-37.

39)              M. Hino, K. Takahashi, T. Itoh, I. Kikuchi and T. Nagasaka：Equilibrium between Liquid Iron and FetO Containing Solid Solution, Scandinavian Journal of Metallurgy, Vol.31 (2002), No.3, 169-177.

40)              T. Washizu, T. Nagasaka and M. Hino：Heat Content of Liquid Fe-Cu-Si Alloy Formed in the Melting Treatment Process of Domestic Waste Incineration Residue, Zeitschrift für Metallkunde, Vol.93 (2002), No.4, 281-287.

41)              T. Miki, N. Ogawa, T. Nagasaka and M. Hino：Activity Measurement of Silicon in Molten Cu-Si Binary Alloy, ISIJ International, Vol.42 (2002), No.10, 1071-1076.

42)              N. Ogawa, T. Miki, T. Nagasaka and M. Hino：Activity Measurement of the Constituents in Molten Sn-Mg-Zn Ternary Lead Free Solder Alloys by Mass Spectrometry, Materials Transactions, Vol.43 (2002), No.12, 3227-3233.

43)              K. Ohno, T. Nagasaka and M. Hino: “In Situ”In Situ” Observation of Smelting Reduction and Carburization of Iron Ore with Carbonaceous Materials by Laser Scanning Microscope, Steel Research, Vol.74 (2003), No.1, 5-8.

44)              H. Itoh, K. Fujii, T. Nagasaka and M. Hino：Gibbs Free Energy and Conditions of Spinel (MgO·Al2O3) Formation in Liquid Steel, Steel Research, Vol.74 (2003), No.2, 86-90.

45)              二塚貴之、粢田清輝、三木貴博、長坂徹也、日野光兀：製鋼スラグから人工海水への成分溶出挙動, 鉄と鋼, Vol.89 (2003), No.4, 382-387.

46)              三木貴博、粢田清輝、佐間田優輔、長坂徹也、日野光兀：海水中相安定図を用いたスラグ成分溶出挙動の解析, 鉄と鋼, Vol.89 (2003), No.4, 388-392.

47)              S. Itoh, T. Azakami, A. Kikuchi and T. Nagasaka : Thermodynamic and Phase Diagram Studies of Ti-Fe-O System, Metals Materials and Processes, Vol.15 (2003), No.1-2, 95-110.

48)              T. Miki, N. Ogawa, T. Nagasaka and M. Hino: Activity Measurement of Liquid Sn-Ag-In and Sn-Zn-Mg Ternary Alloys by Mass Spectrometry, Metals Materials and Processes, Vol.15 (2003), No.1-2, 187-194.

49)              T. Miki, T. Nagasaka and M. Hino: Physico-Chemical Approach for the Ecomaterialization of Steelmaking Slag, Materials Science Forum, Vol. 426-432 (2003), pp. 3335-3340.

50)              T. Tamura, T. Nagasaka and M. Hino: Phase Equilibria of Two-liquid CaO-MgO-FetO-P2O5 Slag Saturated with (Mg,Fe)O, ISIJ International, Vol.44 (2004), No.3, 476-481.

51)              T. Futatsuka, K. Shitogiden, T. Miki, T. Nagasaka and M. Hino: Dissolution Behavior of Nutrition Elements from Steelmaking Slag into Seawater, ISIJ International, Vol.44 (2004), No.4, 753-761.

52)              T. Miki, T. Futatsuka, K. Shitogiden, T. Nagasaka and M. Hino : Dissolution Behavior of Environmentally Regulated Elements from Steelmaking Slag into Seawater, ISIJ International, Vol.44 (2004), No. 4, 762-769

53)              S. Nakazawa, M. Sunada, T. Azakami and T. Nagasaka: New Activity Measurement Technique by Vacuum-Sealed Quartz Cell/Atomic Absorption Spectrophotometer Combination and Its Application to Liquid Bi-In Binary System, Materials Transactions, Vol. 45 (2004), No.9, 2871-2877.

54)              S. Itoh, J. Ono, M. Hino and T. Nagasaka: Kinetic Study on Recovery of Antimony in Anode Slime from Used Lead Batteries Utilizing Volatile Oxide Formation, Materials Transactions, Vol. 46 (2005), No.3, 658-664.

55)              中島謙一、長坂徹也、原田幸明、井島　清: マトリックス法を用いたマルチファンクションユニットシステムLCA, 日本金属学会誌, Vol. 69, No. 2 (2005), pp.221-224.

56)              横山一代、恩田　隆、長坂徹也：動学的廃棄物産業連関分析による最終処分場再生活動の環境評価、日本LCA学会誌, Vol. 2, No.1 (2006), pp.73-79.

57)              中島謙一、原田幸明、井島　清、長坂徹也：関与物質総量（TMR）の算定－エネルギー資源および工業材料のTMR－、日本LCA学会誌, Vol. 2, No.2 (2006), pp.152-158.

58)              玉城わかな、藤巻大輔、林　誠一、友田　陽、松野泰也、長坂徹也:中国の鉄スクラップ需要予測、鉄と鋼, Vol. 92, No.5 (2006), pp. 334-339.

59)              玉城わかな、五十嵐佑馬、藤巻大輔、林　誠一、友田　陽、松野泰也、長坂徹也：韓国の鉄スクラップ需要予測、鉄と鋼, Vol. 92, No.5 (2006), pp.340-345.

60)              W.-Y. Cha, T. Nagasaka, T. Miki, Y. Sasaki and M. Hino: Equilibrium between Titanium and Oxygen in Liquid Fe-Ti Alloy Coexisted with Titanium Oxides at 1873K, ISIJ International, Vol.46 (2006), N0.7, pp.996-1005.

61)              K. Yokoyama, T. Onda, S. Kashiwakura and T. Nagasaka: Waste Input-Output Analysis on “Landfill Mining Activity”, Materials Transactions, Vol.47 (2006), No.10, pp.2582-2587

62)              中島謙一、山本圭介、中野加都子、黒田光太郎、原田幸明、長坂徹也：関与物質総量（TMR）に基づく使用済み携帯電話リサイクルフロー解析、日本LCA学会誌, Vol.2 , No.4 (2006), pp.341-346.

63)              横山一代、久保裕也、森　一広、岡田秀彦、竹内秀次、長坂徹也：強磁場を利用した製鋼スラグからのリンの分離回収、鉄と鋼、Vol.92 (2006), No.11, pp.683-689.

64)              中野加都子、中島謙一、宮部修一、和田安彦、長坂徹也：使用済み携帯電話からの貴金属・レアメタルの再資源化に関する研究、環境管理, Vol.42 (2006), No.11, pp.1073-1086.

65)              S. Itoh, S. Sato, J. Ono, H. Okada and T. Nagasaka: Feasibility Study of the New Rutile Extraction Process from Natural Ilmenite Ore Based on the Oxidation Reaction, Metallurgical and Materials Transactions B, Vol.37B (2006), No.6, pp. 979-985.

66)              K. Nakajima, K. Yokoyama, Y. Matsuno and T. Nagasaka: Material Flow Analysis of Molybdenum Associated with Iron and Steel Flow in Japanese Economy, ISIJ International, Vol.47 (2007), No.3, pp.510-515.

67)              五十嵐祐馬、松野泰也、林　誠一、鶴岡正顯、小田部和美、長坂徹也：自動車シュレッダーおよびダスト中のトランプエレメント濃度の測定と重量バランス分析、鉄と鋼、Vol.93 (2007), No.4, pp.330-335.

68)              K. Nakajima, H. Osuga, K. Yokoyama and T. Nagasaka: Material Flow Analysis of Aluminum Dross and Environmental Assessment for Its Recycling, Materials Transactions, Vol.48 (2007), No.8, pp.2219-2224.

69)              K. Nakajima, K. Yokoyama, K. Nakano and T. Nagasaka: Substance Flow Analysis of Indium in Japan, Materials Transactions, Vol.48 (2007), No.9, pp.2365-2369.

70)              中野加都子、宮部修一、尾崎　平、和田安彦、中島謙一、長坂徹也：携帯電話に含有される微量有害物質のサブスタンス・フロー分析、日本金属学会誌, Vol.71 (2007), No.9, pp. 801-808.

71)              S. Itoh, T. Suga, H. Takizawa and T. Nagasaka: Application of 28 GHz Microwave Irradiation to Oxidation of Ilmenite Ore for New Rutile Extraction Process, ISIJ International, Vol.47 (2007), No.10, pp.1416-1421.

72)              S. Nakamura, K. Nakajima, Y. Kondo and T. Nagasaka: Waste Input-Output Approach to Material Flow Analysis: Concepts and Application to Base Metals, Journal of Industrial Ecology, Vol.11 (2007), No.4, pp.50-63.

73)              T. Orimoto, T. Noda, M. Ichida and T. Nagasaka: Desulfurization Technology in the Blast Furnace Raceway by MgO-SiO2 Flux Injection, ISIJ International, Vol.48 (2008), No.2, pp.141-146.

74)              横山一代、中島謙一、中村愼一郎、長坂徹也：随伴元素成分を考慮した鉄鋼リサイクルフロー分析、日本エネルギー学会誌、Vol.87 (2008), No.4, pp.243-249.

75)              K. Nakajima, K. Yokoyama and T. Nagasaka: Substance Flow Analysis of Manganese Associated with Iron and Steel Flow in Japan, ISIJ International, Vol.48 (2008), No.4, pp.554-558.

76)              H. Kubo, K. Yokoyama, K. Nakajima, S. Hashimoto and T. Nagasaka: The Application of Material Stock and Flow Accounting to Phosphorus in Japan, Journal of Environmental Engineering and Management, Vol.18 (2008), No.1, pp.47-53.

77)              岡田益男、橋爪秀利、長坂徹也、中島美樹子：国際コンピテンシー人材育成教育プログラム、工学教育 , Vol. 56 (2008), No. 3, pp.118-122.

78)              松八重一代、久保裕也、大竹久夫、長坂徹也：廃棄物からの人工リン資源回収、社会技術研究論文集, Vol.5 (2008), pp.106-113.

79)              T. Matsumura, M. Ichida, T. Nagasaka and K. Kato: Carbonization Behaviour of Woody Biomass and Resulting Metallurgical Coke Properties, ISIJ International, Vol.48 (2008), No.5, pp.572-577.

80)              Shinichiro Nakamura, Shinsuke Murakami, Kenichi Nakajima and Tetsuya Nagasaka: Hybrid Input-Output Approach to Metal Production and Its Application to the　Introduction of Lead-Free Solders, Environmental Science & Technology, Vol.42 (2008), No.10, pp.3843-3848. [10.1021/es702647b]

81)              松八重（横山）一代、中島謙一、小野恭平、中村愼一郎、長坂 徹也：WIO-MFAおよびSFAによる我が国の鉄資源循環とマンガンフロー分析、鋳造工学, Vol.80 (2008), No.6, pp.330-336.

82)              S. Itoh, A. Tsubone, K. Matsubae-Yokoyama, K. Nakajima and T. Nagasaka: New EAF Dust Treatment Process with the Aid of Strong Magnetic Field, ISIJ International, Vol.48 (2008), No.10, pp.1339-1344.

83)              K. Nakajima, K. Matsubae-Yokoyama, S. Nakamura, S. Itoh and T. Nagasaka: Substance Flow Analysis of Zinc Associated with Iron and Steel Flow in Japan, ISIJ International, Vol.48 (2008), No.10, pp.1478-1483.

84)              K. Nakajima, O. Takeda, T. Miki and T. Nagasaka: Evaluation Method of Recyclability of Metal Resources based on Thermodynamic Analysis, Materials Transactions, Vol.50 (2009), No.3, pp.453-460.　

 

85)              久保裕也、松八重（横山）一代、長坂徹也：マルチフェーズ脱リンスラグからのリン濃縮相の磁気分離、鉄と鋼、Vol.95 (2009), No.3, pp.300-305.

 

86)              松八重（横山）一代、久保裕也、長坂徹也：磁気分離法による溶銑脱リンスラグからのリン回収法で生成する残渣スラグのリサイクル効果、鉄と鋼、Vol.95 (2009), No.3, pp.306-312.

 

87)              S. Kashiwakura, H. Kubo, Y. Kumagai, H. Kubo, K. Matsubae-Yokoyama, K. Nakajima and T. Nagasaka: Removal of Boron from Coal Fly Ash by HCl Washing, Fuel, Vol.88 (2009), No.7, pp.1245-1250.

 

88)              Takafumi Takahashi, Syunsuke Kashiwakura, Koji Kanehashi and Tetsuya Nagasaka: First High-Resolution 11B Nuclear Magnetic Resonance (NMR) Spectra of Coal Fly Ash by Satellite-Transition Magic Angle Spinning (STMAS) NMR, Energy & Fuels, Vol.23 (2009), No.3, pp.1778-1780.

89)              Y.-S. Jeong, H. Kubo, K. Matsubae-Yokoyama, J.-J. Pak and T. Nagasaka: Substance Flow Analysis of Phosphorus and Manganese Correlated with Korean Steel Industry, Resources, Conservation and Recycling, Vol.53 (2009), No.9, pp. 479-489.

90)              T. Noda, K. Oikawa, S. Itoh, M. Hino and T. Nagasaka: Thermodynamic Evaluation of Cu-Cu3P System Based on Newly Determined Gibbs Free Energy of Formation of Cu3P, Calphad,Vol.33 (2009), No.3, pp.557-560.

91)              K. Matsubae-Yokoyama, H. Kubo, K. Nakajima and T. Nagasaka: A Material Flow Analysis of Phosphorus in Japan - The Iron and Steel Industry as a Major Source, Journal of Industrial Ecology, Vol.13 (2009), No.5, pp.687-705.

92)              S. Nakamura, K. Nakajima, Y. Yoshizawa, K. Matsubae-Yokoyama and T. Nagasaka: Analyzing Polyvinyl Chloride in Japan With the Waste Input−Output Material Flow Analysis Model, Journal of Industrial Ecology, Vol.13 (2009), No.5, pp.706-717.

93)              S. Kashiwakura, Y. Takahashi, H. Maekawa and T. Nagasaka: Application of 11B MAS-NMR to the characterization of boron in coal fly ash generated from Nantun coal, Fuel, Vol.89 (2010), No.5, pp. 1006-1011.

94)              K. Nakajima, O. Takeda, T. Miki, K. Matsubae, S. Nakamura and T. Nagasaka: Thermodynamic Analysis on the Contamination by Alloying Element in Aluminum Recycling, Environmental Science & Technology, Vol.44 (2010), No.14 , pp. 5594–5600.

95)              S. Hayashi, T. Takahashi, K. Kanehashi, N. Kubota, K. Mizuno, S. Kashiwakura, T. Sakamoto and T. Nagasaka: Chemical State of Boron in Coal Fly Ash Investigated by Focused-Ion-Beam Time-Of-Flight Secondary Ion Mass Spectrometry (FIB-TOF-SIMS) and Satellite-Transition Magic Angle Spinning Nuclear Magnetic Resonance (STMAS-NMR), Chemosphere, Vol.80 (2010), No.8, pp.881–887.

96)              S. Kashiwakura, H. Ohno, K. Matsubae-Yokoyama, Y. Kumagai, H. Kubo and T. Nagasaka: Removal of Arsenic in Coal Fly Ash by Acid Washing Process Using Dilute H2SO4 Solvent, Journal of Hazardous Materials, Vol.181 (2010), No.1-3, pp.419-425.

97)              K. Matsubae, K. Nakajima, S. Nakamura and T. Nagasaka: Impacts on CO2 of the Recovery of Secondary Ferrous Materials from Alternative ELV Treatment Methods: A Waste Input Output Analysis, ISIJ International, Vol.51 (2011), No. 1, pp.151-157.

98)              T. Takahashi, S. Kashiwakura, K. Kanehashi, S. Hayashi, T. Nagasaka: Analysis of Atomic Scale Chemical Environments of Boron in Coal by 11B Solid State NMR, Environmental Science & Technology, Vol.45 (2011), No.3, pp.890–895.

99)              S. Nakamura, Y. Kondo, K. Matsubae, K. Nakajima and T. Nagasaka: UPIOM: A New Tool of MFA with Application to the Flow of Iron and Steel Associated with Car Production, Environmental Science & Technology, Vol.45 (2011), No.3, pp.1114–1120.

100)          S. Kashiwakura, T. Takahashi and T. Nagasaka: Vaporization Behavior of Boron from Standard Coals in the Early Stage of Combustion, Fuel, Vol.90 (2011), No.4, pp.1408–1415.

101)          K. Nakajima, O. Takeda, T. Miki, K. Matsubae and T. Nagasaka: Thermodynamic Analysis for the Controllability of Elements in Recycling Process of Metals, Environmental Science & Technology,Vol.45 (2011), No.11, pp.4929-4936.

102)          K. Matsubae, J. Kajiyama, T. Hiraki and T. Nagasaka: Virtual Phosphorus Ore Requirement of Japanese Economy, Chemosphere, Vol.84 (2011), No.6, pp. 767–772.

103)          T. Hiraki, O. Takeda, K. Nakajima, K. Matsubae, S. Nakamura and T. Nagasaka: Thermodynamic Criteria for the Removal of Impurities from End-of-Life Magnesium Alloys by Evaporation and Flux Treatment, Science and Technology of Advanced Materials, Vol.12 (2011), No.3, 035003.

104)          Kenichi Nakajima, Keisuke Nansai, Kazuyo Matsubae, Yasushi Kondo, Shigemi Kagawa, Rokuta Inaba, Shinichiro Nakamura and Tetsuya Nagasaka: Identifying the Substance Flow of Metals Embedded in Japanese International Trade by use of WIO-MFA model, ISIJ International, Vol.51 (2011), No. 11, pp. 1934–1939

105)          Hwong-wen Ma, Kazuyo Matsubae, Kenichi Nakajima, Min-Shing Tsai, Kung-Hsien Shao, Pi-Cheng Chen, Chia-Ho Lee and Tetsuya Nagasaka: Domestic Substance Flow of Zinc and Present Status of EAF Dust Management for Zinc Recovery in Taiwan, Resource Conservation and Recycling, Vol.56 (2011), No.1, pp.134-140.

106)          S. Kashiwakura, H. Ohno, Y. Kumagai, H. Kubo, K. Matsubae and T. Nagasaka: Dissolution Behavior of Selenium from Coal Fly Ash Particles for the Development of an Acid-Washing Process, Chemosphere, Vol.85 (2011), No.4, pp.598-602.

107)          Naoki Kikuchi, Seiji Nabeshima, Takako Yamashita, Yasuo Kishimoto, Seetharaman Sridhar and Tetsuya Nagasaka: Micro-Structure Refinement in Low Carbon High Manganese Steels Through Ti-Deoxidation, Characterization and Effect of Secondary Deoxidation Particles, ISIJ International, Vol.51 (2011), No.12, pp.2019-2028.

108)          X. Lu, T. Hiraki, K. Nakajima, O. Takeda, K. Matsuabe, H.-M. Zhu, S. Nakamura and T. Nagasaka:　Thermodynamic Analysis of Separation of Alloying Elements in Recycling of End-of-Life Titanium Products, Separation and Purification Technology, Vol.89 (2012), pp.135–141.

109)          X. Lu, K. Nakajima, H. Sakanakura, K. Mastubae, H. Bai and T. Nagasaka: Thermodynamic Estimation on Minor Element Distribution between Immiscible Liquids in Fe-Cu Based Metal Phase Generated in High Temperature Treatment of Municipal Solid Wastes, Waste Management, Vol.32 (2012), No.6, pp.1148-1155.

110)          T. Hiraki, K. Kobayashi, S. Urushibata, K. Matsubae and T. Nagasaka: Removal of Sulfur from CaF2 Containing Desulfurization Slag Exhausted from Secondary Steelmaking Process by Oxidation, Metallurgical and Materials Transactions B, Vol.43B (2012), No.4, pp.703-709.

111)          Akira Tsubone, Tsuyoshi Momiyama, Masanori Inoue, Romchat Chairaksa, Kazuyo Matsubae, Takahiro Miki and Tetsuya Nagasaka: Dust Injection Technology for Reducing Dust Treatment Burden, Iron&Steel Technology, Vol.9 (2012), No.7, pp.184-194.

112)          Elizabeth Webeck, Fumihiko Imamura, Fuming Wang, Hongmin Zhu and Tetsuya Nagasaka: An International Freshman Exchange Program: A Trial for Engineering Design Education, Journal of Engineering Education Research, Vol.15 (2012), No.4, pp.8-13.

113)          Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, Kenichi Nakajima, Tomohiro Tasaki, and Tetsuya Nagasaka: Quality and dilution losses of the recycling of ferrous materials embedded in passenger cars: input-output analysis under explicit consideration of scrap quality, Environmental Science & Technology, Vol.46 (2012), No.17, pp.9266–9273.

114)          K. Kobayashi, T. Hiraki and T. Nagasaka: Oxidation of Pure Solid CaS with Ar-O2 Gas Mixture, High Temperature Materials and Processes, Vol.31 (2012), pp.667-673.

115)          K. Nakajima, H. Ohno, Y. Kondo, K. Matsubae, O. Takeda, T. Miki, S. Nakamura and T. Nagasaka: Simultaneous material flow analysis of nickel, chromium and molybdenum used in alloy steel by means of input-output analysis, Environmental Science & Technology, Vol.47 (2013), No.9, pp.4653-4660.

116)          E. Yamasue, K. Matsubae, K. Nakajima, S. Hashimoto and T. Nagasaka: Recyclability of Phosphorous from Steelmaking Slag in Terms of Total Materials Requirement, Journal of Industrial Ecology, Vol.17  (2013), No.5, pp.722-730.

117)          Y. Tobu, M. Nakano, T. Nakagawa and T. Nagasaka: Effect of Granule Structure on the Combustion Behavior of Coke Breeze for Iron Ore Sintering, ISIJ International, Vol.53 (2013), No.9, pp.1594-1598.

118)          Kenji Nakase, Akitoshi Matsui, Naoki Kikuchi, Yuji Miki, Yasuo Kishimoto, Itsuo Goto, Tetsuya Nagasaka: Fundamental Research on a Rational Steelmaking Slag Recycling System by Phosphorus Separation and Collection, Journal for Manufacturing Science & Production, Vol.13 (2013), No.1-2, pp. 39-45.

119)          Elizabeth Webeck, Kazuyo Matsubae, Kenichi Nakajima, Keisuke Nansai, Tetsuya Nagasaka: Analysis of Phosphorus Dependency in Asia, Sociotechnica, Vol.11 (2014), pp.119-126.

120)          Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Shinichiro Nakamura and Tetsuya Nagasaka: Unintentional Flow of Alloying Elements in Steel during Recycling of End-of-Life Vehicles, Journal of Industrial Ecology, Vol.18 (2014), No.2, pp. 242–253.

121)          中島謙一、南斉規介、松八重一代、長坂徹也：グローバルサプライチェーンを通じた鉄の国際移動量、鉄と鋼、Vol.100 (2014), No.6, pp.750-755.

122)          松八重一代、飯塚陽祐、大野　肇、平木岳人、三木貴博、中島謙一、長坂徹也：自動車由来鉄鋼スクラップ再資源化における鉄鋼合金元素分配傾向、鉄と鋼、Vol.100 (2014), No.6, pp.788-793.

123)          松八重一代、飯塚陽祐、長村弘樹、大野 肇、中島謙一、長坂徹也：廃自動車由来の鉄鋼スクラップソーティングのコストベネフィット解析、鉄と鋼、Vol.100 (2014), No.6, 794-798.

124)          Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae, Kenichi Nakajima, Shigemi Kagawa, and Tetsuya Nagasaka: MaTrace: Tracing the fate of materials over time and across products in  open-loop recycling, Environmental Science & Technology, Vol.48 (2014), No.13, pp.7207-7214.

125)          Takehito Hiraki, Takahiro Miki, Kenichi Nakajima, Kazuyo Matsubae, Shinichiro Nakamura and Tetsuya Nagasaka: Thermodynamic Analysis for the Refining Ability of Salt Flux for Aluminum Recycling, Materials, Vol.7 (2014), pp.5543-5553.

126)          Kenichi Nakajima, Yuto Otsuka, Yasunori Iwatsuki, Keisuke Nansai, Hiroya Yamano, Kazuyo Matsubae, Shinsuke Murakam and Tetsuya Nagasaka: Global Supply Chain Analysis of Nickel: Importance and Possibility of Controlling the Resource Logistics, Metallurgical Research & Technology, Vol.111 (2014), No.6, pp. 339 – 346.

127)          Shigemi Kagawa, Shinichiro Nakamura, Yasushi Kondo, Kazuyo Matsubae and Tetsuya Nagasaka: Forecasting Replacement Demand of Durable Goods and the Induced Secondary Material Flows: A Case Study of Automobiles, Journal of Industrial Ecology, Vol.19 (2015), No.1, pp.10-19.

128)          Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Yasushi Kondo, Shinichiro Nakamura, Tetsuya Nagasaka: Towards the efficient recycling of alloying elements from End of Life Vehicle steel scrap, Resources, Conservation & Recycling, Vol.100 (2015), pp.11-20.

129)          T. Hiraki and T. Nagasaka: An Easier Upgrading Process of Aluminum Dross Residue by Screening Technique, Journal of Material Cycles and Waste Management, Vol.17 (2015), pp. 566–573.

130)          Romchat Chairaksa Fujimoto, Yosuke Inoue, Naoyoshi Umeda, Satoshi Itoh and Tetsuya Nagasaka: New pyrometallurgical process of EAF dust treatment with CaO addition, International Journal of Minerals, Metallurgy and Materials, Vol.22 (2015), No.8, pp 788-797.

131)          E. Webeck, K. Matsubae, T. Nagasaka: Phosphorus requirements for the changing diets of China, India and Japan, Environmental Economics and Policy Studies, Vol.17 (2015), No.3, pp.455-469.

132)          Elizabeth Webeck, Kazuyo Matsubae, Kenichi Nakajima, Keisuke Nansai, Tetsuya Nagasaka Phosphorus Flows in the Asian Region, Global Environmental Research, Vol.19 (2015), No.1, pp.9-17.

133)          Kazuyo Matsubae, Elizabeth Webeck, Keisuke Nansai, Kenichi Nakajima, Mikiya Tanaka, Tetsuya Nagasaka: Hidden phosphorus flows related with non-agriculture industrial activities: A focus on steelmaking and metal surface treatment, Resources, Conservation & Recycling, Vol.105-B (2015), pp. 360–367.

134)          Romchat Chairaksa Fujimoto, Katsuya Maruyama, Takahiro Miki and Tetsuya Nagasaka: Hydrometallurgical Extraction of Zinc from CaO Treated EAF Dust in Sodium Hydroxide Solution, Hydrometallurgy, Vol.159 (2016), pp.120-125.

135)          Takahiro Miki, Romchat Chairaksa-Fujimoto, Katsuya Maruyama, Tetsuya Nagasaka: Hydrometallurgical Extraction of Zinc from CaO Treated EAF Dust in Ammonium Chloride Solution, Journal of Hazardous Materials, Vol.302 (2016), Jan., pp.90-96.

136)          Kazuyo Matsubae, Eiji Yamasue, Tadahiro Inazumi, Elizabeth Webeck, Takahiro Miki, Tetsuya Nagasaka: Innovations in Steelmaking Technology and Hidden Phosphorus Flows, Science of the Total Environment, Vol.542 (2016), pp.1162-1168.

137)          Shohei Koizumi, Takahiro Miki and Tetsuya Nagasaka: Enrichment of Phosphorus Oxide in Steelmaking Slag by Utilizing Capillary Action, Journal of Sustainable Metallurgy, Vol.2 (2016), pp.38-43.

138)          Xin Lu, Kazuyo Matsubae, Kenichi Nakajima, Shinichiro Nakamura and Tetsuya Nagasaka: Thermodynamic Consideration on the Contamination by Alloying Elements in Remelted End-of-Life Nickel- and Cobalt-Base Superalloys, Metallurgical and Materials Transactions B, Vol.47B (2016), pp.1785-1795.

139)          Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Keisuke Nansai; Yasuhiro Fukushima; Tetsuya Nagasaka: Consumption-based Accounting of Steel Alloying Elements and Greenhouse Gas Emissions Associated with the Metal use: The Case of Japan, Journal of Economic Structures, Vol.5 (2016), 28.

140)          Kentaro Takeyama, Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Yasushi Kondo, Tetsuya Nagasaka: Dynamical material flow analysis of alloy elements associated with steel materials by using matrace, Matériaux & Techniques, Vol.104 (2016), No.5, pp.610-616.

141)          Xin Lu, Takahiro Miki and Tetsuya Nagasaka: Activity coefficients of NiO and CoO in CaO-Al2O3-SiO2 slag and their application to the recycling of the Ni-Co-Fe-based end-of-life superalloys via remelting, International Journal of Minerals, Metallurgy, and Materials, Vol.24 (2017), No.1, pp.25-36.

142)          H. Ohno, Y. Fukushima, K. Matsubae, K. Nakajima, T. Nagasaka: Revealing Final Destination of Special Steel Materials with Input-Output-Based Material Flow Analysis, ISIJ International, Vol.57 (2017), pp.193-199.

143)          Kenichi Nakajima, Keisuke Nansai, Kazuyo Matsubae, Makoto Tomita, Wataru Takayanagi, Tetsuya Nagasaka: Global Land-Use Change Hidden Behind Nickel Consumption, Science of the Total Environment, Vol.586 (2017), pp. 730-737.

144)          佐々木翔、松八重一代、中島謙一、村上進亮、長坂徹也：責任あるサプライチェーンの実現に向けたニッケル資源利用に関わるリスク要因の整理と解析、日本 LCA 学会誌, Vol.13 (2017), No.1, pp.2-11.

145)          Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, Yasushi Kondo, Shinichiro Nakamura, Tetsuya Nagasaka: Optimal Recycling of Steel Scrap and Alloying Elements Derived from End-of-Life Vehicles: An Input-Output based Linear Programming Approach, Environmental Science & Technology, Vol.51 (2017), No.22, pp 13086-13094.

146)          Takehito Hiraki, Yuichi Maruyama, Yuta Suzuki, Satoshi Itoh and Tetsuya Nagasaka: Up-grading of Natural Ilumenite Ore by Combining Oxidation and Acid Leaching, International Journal of Minerals, Metallurgy and Materials, Vol.25 (2018), No.7, pp 729-736.

147)          Xin Lu, Takahiro Miki and Tetsuya Nagasaka: High-temperature oxidation paths, according to the oxide-alloy phases equilibria in the ternary Ni-Co-Fe system, Corrosion Science, Vol.139 (2018), pp.114–123.

148)          Naoki Kumagai, Takehito Hiraki, Uday B. Pal , Eiki Kasai and Tetsuya Nagasaka: New concept of rutile processing from ilmenite ore; Free energy of formation of pseudobrookite, Metallurgical and Materials Transactions B, Vol.49B (2018), No.5, pp.2278-2284.

149)          片桐　究、溝口修史、松八重一代、長坂徹也：日本における産業を中心とした窒素フローの2005年から2015年にかけての変化、日本 LCA 学会誌, Vol.14 (2018), No.4, pp.319-331.

150)          Liyun Yang, Tingting Wen, Liping Wang, Takahiro Miki, Hao Bai, Xin Lu, Huafang Yu, Tetsuya Nagasaka: The stability of the compounds formed in the process of removal Pb(II), Cu(II) and Cd(II) by steelmaking slag in an acidic aqueous solution, Journal of Environmental Management, Vol.231 (2019), No.1, pp.41-48.

151)          Liyun Yang, Xiaoming Qian, Peng Yuan, Hao Bai, Takahiro Miki, Fanxu Men, Hong Li, Tetsuya Nagasaka: Green synthesis of zeolite 4A using fly ash fused with synergism of NaOH and Na2CO3, Journal of Cleaner Production, Vol.212 (2019), pp.250-260.

152)          G. Chen, L. Yang, J. Chen, T. Miki, S. Li, H. Bai, T. Nagasaka: Competitive mechanism and influencing factors for the simultaneous removal of Cr(III) and Zn(II) in acidic aqueous solutions using steel slag: Batch and column experiments, Journal of Cleaner Production, Vol.230 (2019), pp.69-79.

153)          Xin Lu, Takahiro Miki, Takehito Hiraki, Hongmin Zhu and Tetsuya Nagasaka: Thermodynamics of Elements in Dilute Silicon Melts, JOM, Vol.71 (2019), No.4, pp.1456-1470.

154)          Xin Lu, Takahiro Miki, Osamu Takeda, Hongmin Zhu, Tetsuya Nagasaka: Thermodynamic criteria of the end-of-life silicon wafers refining for closing the recycling loop of photovoltaic panels, Science and Technology of Advanced Materials, Vol.20 (2019), No.1, pp.813–825.

155)          Zhengyang Zhang, Kentaro Takeyama, Hajime Ohno, Kazuyo Matsubae, Kenichi Nakajima, and Tetsuya Nagasaka: An estimation of the amount of dissipated alloy elements in special steel from automobile recycling, Matériaux & Techniques, Vol.107 (2019), pp.105-112.

156)          Ryoko Yoshida, Junpei Yoshida, Huafang Yu, Yasushi Sasaki, Tetsuya Nagasaka : Carbothermic Reduction of phosphoric acid extracted from dephosphorization slags to produce yellow phosphorus, International Journal of Metallurgical & Materials Engineering, Vol.13 (2019), No.11, pp.527-530.

157)          Jonah Gamutan, Takahiro Miki, Tetsuya Nagasaka: Morphology and Composition of Inclusions in Si-Mn Deoxidized Steel at the Solid-Liquid Equilibrium Temperature, ISIJ International, Vol.60 (2020), No.1, pp.84-91.

158)          Tingting Wen, Liyun Yang, Chenyuan Dang, Maomao Yang, Takahiro Miki, Hao Bai, Tetsuya Nagasaka: Effect of modified basic oxygen furnace slag on the controlled release of nitrate nitrogen and the functional microbial community in soil, Journal of Environmental Management, Vol.261 (2020), 110191-1-8.

159)          T. Wen, L. Yang, C. Dang, M. Yang, T. Miki, H. Bai, T. Nagasaka: Effect of basic oxygen furnace slag on succession of the bacterial community and immobilization of various metal ions in acidic contaminated mine soil, Journal of Hazardous Materials, Vol.388 (2020), 121784, 1-10.

160)          Huafang Yu, Takahiro Miki, Yasushi Sasaki, Tetsuya Nagasaka：Crystallography of the High-Temperature Ca2SiO4-Ca3P2O8 Solid Solutions, Metallurgical and Materials Transactions B, Vol.51B (2020), No.6, pp. 3007-3015.

161)          Jonah Gamutan, Takahiro Miki, Tetsuya Nagasaka: MnS precipitation behavior in MnO-SiO2 inclusion in Fe-Mn-Si-O-S alloy system at solid-liquid coexistence temperature, ISIJ International, Vol. 60 (2020), No. 8, pp. 1610–1616.

162)          Shoki Kosai, Kenyu Matsui, Kazuyo Matsubae, Eiji Yamasue, Tetsuya Nagasaka：Natural resource use of gasoline, hybrid, electric and fuel cell vehicles considering land disturbances, Resource Conservation & Recycling, Vol.166 (2021), pp.105256-1-8.

163)          山﨑裕貴、平木岳人、鈴村隆広、三木貴博、佐々木康、長坂徹也：AC2Bアルミニウム合金溶湯の水素溶解度および真空脱水素処理、軽金属, Vol.71 (2021), No.1, pp.44-50.

164)          Liyun Yang, Shuwu Li, Yan Lv, Takahiro Miki, Libing Yang, Tetsuya Nagasaka: A composite adsorbent of ZnS nanoclusters grown in zeolite NaA synthesized from fly ash with a high mercury ion removal efficiency in solution, Journal of Hazardous Materials, Vol.411 (2021), 125044, pp.1-13.

165)          Huafang Yu, Takahiro Miki, Yasushi Sasaki, Tetsuya Nagasaka: Phosphorous recovery from Ca2SiO4-Ca3P2O8 solid solution by carbothermic reduction, Journal of Sustainable Metallurgy, Vol.7 (2021), No.2, pp.459-469.

166)          武田浩太郎、ハンゼン・マーク、池ノ上芳章、長坂徹也：我が国の材料科学系論文誌のステータス分析、日本金属学会誌、Vol. 85 (2021), No.6, pp. 229-238.

167)          Shunsuke Koide, Hitoshi Mizuno, Kazuyoshi Yamaguchi, Fumio Tanno and Tetsuya Nagasaka : New EAF Dust Treatment Process for Co-Production of Metallic Zinc and Calcium-Ferrite, Iron&Steel Technology, Vol.18 (2021), May, pp.70-78.

168)          Xin Lu, Takahiro Miki, Yasushi Sasaki and Tetsuya Nagasaka: Thermodynamic criteria of alloying elements elimination during recycling end-of-life zinc-based products by remelting, Resource Conservation and Recycling, 176 (2022), pp.105913-1-9.

169)          Liyun Yang, Mengdan Gao, Tianci Wei, Tetsuya Nagasaka: Synergistic removal of As(V) from aqueous solution by nanozero valent iron, Journal of Hazardous Materials, Vol.424 (2022), pp.127428.

170)          Huafang Yu, Xin Lu, Takahiro Miki, Kazuyo Matsubae, Yasushi Sasaki, Tetsuya Nagasaka: Sustainable phosphorus supply by phosphorus recovery from steelmaking slag: a critical review, Resource Conservation and Recycling, Vol.180 (2022), pp.106203-106203.

171)          Xin Lu, Zhengyang Zhang, Takehito Hiraki, Hongmin Zhu, Kazuyo Matsubae, Tetsuya Nagasaka: A solid-state electrolysis process for upcycling aluminium scrap, Nature, Vol.608 (2022), Issue 7914, pp., 511–515.

172)          Xin Lu,  Hajime Ohno,  Osamu Takeda,  Takahiro Miki,  Yasushi Sasaki,  Hongmin Zhu,  Tetsuya Nagasaka: Toward an efficient recycling system: Evaluating recyclability of end-of-life stainless steels by considering elements distribution during a remelting process, Journal of Industrial Ecology, Vol.26 (2022), pp.1701-1703.

173)          Shuangjian Yang; Liyun Yang; Pengfei Xiong; Xiaoming Qian; Tetsuya Nagasaka: Ammonium continuous removal by zeolite P synthesized using fly ash combined with bacteria in aqueous solution, Environmental Science and Pollution Research, Vol.29 (2022), pp.81892-81908.

174)          Mengdan Gao, Liyun Yang, Shuangjian Yang, Tong Jiang, Fei Wu and Tetsuya Nagasaka: Simple Aminated Modified Zeolite 4A Synthesized Using Fly Ash and Its Remediation of Mercury Contamination: Characteristics and Mechanism, Sustainability, Vol.14 (2022), pp.15924.

175)          Liyun Yang, Tong Jiang, Pengfei Xiong, Shuangjian Yang, Mengdan Gao, Tetsuya Nagasaka: Green activating silica-alumina insoluble phase of fly ash to synthesize zeolite P with high adsorption capacity for Pb(II) in solution, Advanced Powder Technology, Vol.34 (2023), pp.103938

176)          Marian Nida Lumongsod, Jonah Gamutan, Kazuki Hara, Yasushi Sasaki, and Tetsuya Nagasaka:  Enhanced Leaching of Zinc Ferrite by the Formation of a Solid Solution with Magnetite in Hydrochloric Acid Solution, Metallurgical and Materials Transactions B, Vol.54B (2023), pp.2291-2301.

177)          Jonah Gamutan, Shunsuke Koide, Yasushi Sasaki, and Tetsuya Nagasaka: Selective Dissolution and Kinetics of Leaching Zinc from Lime Treated Electric Arc Furnace Dust by Alkaline Media, Journal of Environmental Chemical Engineering, Vol.12 (2024), in press

原著論文：176編

総被引用数：6,118回

h-index：44

引用数／論文：34.8回　　Scopus調べ


山口　一良（Kazuyoshi Yamaguchi）

（研究業績：代表的な論文５編について記載する。）

(1)   Y. Togino, M. Sugata and K. Yamaguchi：Estimation of Lower Limit of Fuel Rate in Blast Furnace by Mathematical Model：Transactions ISIJ, 20 (1980), 639-645.

(2)   K. Yamaguchi, H. Ueno, S. Matsunaga, K. Kakiuchi and S. Amano：Test on High-rate Pulverized Coal Injection Operation at Kimitsu No. 3 Blast Furnace：ISIJ Int. 5 (1995), 2, 148-155.

(3)   山口一良，鵜野建夫：高炉炉下部におけるコークス粉化機構および難粉化性状，日本エネルギー学会誌，78 (1999), 9, 760-771.

(4)   山口一良：高炉の還元性，通気性に及ぼす塊成鉱中の脈石，気孔の影響：鉄と鋼．87 (2001), 5, 335-341.

(5)   山口一良，埜上洋，植田滋，長坂徹也：今後の世界情勢変化に対応した日本の基幹金属素材製造業の進むべき方向性：日本エネルギー学会100周年記念懸賞論文一般部門優秀賞，日本エネルギー学会機関誌えねるみくす, 102 (2023), 197-204.

柏谷　悦章（Yoshiaki　Kashiwaya）

主要学術論文５編

1)      柏谷悦章、石井邦宜

     H2Oによるコークスガス化反応の反応機構と速度解析

     鉄と鋼、vol. 79 (1993), pp. 1311-1316

 

2)      Y. Kashiwaya, C. E. Cicutti, A. W. Cramb and K. Ishii

     Development of double and single hot thermocouple technique for in situ observation and measurement of mold slag crystallization

ISIJ International, vol. 38 (1998), pp. 348-356


3)      柏谷悦章、高畑雅博、石井邦宜、山口一良、内藤誠章、長谷川　博

     高温域における球形コークスの反応にともなう組織変化と粉発生挙動

     鉄と鋼、vol. 87 (2001), pp. 259-266

 

4)      M. TAKAHATA, Y. KASHIWAYA, and K. ISHII

     Kinetics of methane hydrate formation catalyzed by iron oxide and carbon under intense stirring conditions

Mater. Trans., vol. 51 (2010), pp.727-734


5)  Yoshiaki Kashiwaya

Crystal phases formed in a CaO-Fe2O3 system under a high cooling rate in air

Metall and Materi Trans B, vol.48 (2017), pp.3228-3238


他学術論文：106 編（計111編）

著書　　　：  8点

参考論文　： 30 編（Proceedingの件数）

受賞　　　： 10 件

総被引用数：2,022

h-index   ：25

Citation per paper：18.2

佐々木　康（Yasushi Sasaki）

研究業績：代表的な論文５編について記載する。

(1)   Y. Sasaki, S. Hara, D. R. Gaskell, and G. R. Belton:

Isotope Exchange Studies of the Rate of Dissociation of CO2 on Liquid Iron Oxides and CaO-Saturated Calcium Ferrites： Metallurgical Transactions B, vol.15B, (1984), pp.563-571.

(2)   Yasushi Sasaki, Seiju Suzuki, and Kuniyoshi Ishii:

Deposition of tungsten by natural convection flow in CVD process: Journal of Chemical Engineering of Japan, vol.31, (1998), pp.135-137.

(3)   Ji-Ook Park, Tran Van Long and Yasushi Sasaki:

Feasibility of solid state steelmaking from cast iron, ISIJ Int., vol. 52 (2012), 26-34. (澤村論文賞受賞)

(4)   Ji-Ook Park, In-Hyoen Jeong, and Y. SASAKI:

Metal-slag separation behaviors of pellets consisted of iron, graphite, and CaO-Al2O3 based slag powders: ISIJ Int. 54 (2014), p1530.　(澤村論文賞受賞)

(5)   Huafang Yu, Xin Lu, Takahiro Miki, Kazuyo Matsubae, Yasushi Sasaki, Tetsuya Nagasaka:

 Sustainable phosphorus supply by phosphorus recovery from steelmaking slag: a critical review.　Resources, Conservation and Recycling, Vol. 180, (2022), 106203.

(Resources, Conservation and Recycling 2022年度のBest Paper Award 受賞)

石原　真吾（Singo Ishihara）

業績リスト

 (1)　論文

1.        Kizuku Kushimoto, Kaya Suzuki, Shingo Ishihara, Rikio Soda, Kimihiro Ozaki, Junya Kano, Analysis of the particle collision behavior in spiral jet milling, Advanced Powder Technology, 34(5), 103933-103933 2023年5月

2.        Shingo Ishihara, George Franks, Junya Kano, Effect of particle packing structure on the elastic modulus of wet powder compacts analyzed by persistent homology, Advanced Powder Technology 34(1) 103874-103874 2023年1月

3.        Yuta Kato, Kizuku Kushimoto, Shingo Ishihara, Junya Kano, Development of a method for estimating particles mixing curves in short DEM simulation time, Advanced Powder Technology 33(12) 103841-103841 2022年12月

4.        Tomoya Wada, Takafumi Uematsu, Hiroyuki Shiomi, Kazutomo Osaki, Shingo Ishihara, Junya Kano, Prediction of power of a vibration rod mill during cellulose decrystallization processing by DEM, Advanced Powder Technology 32(10) 3717-3724 2021年10月

5.        河村 順平, 久志本 築, 石原 真吾, 加納 純也, 異なる食品粉体の混合挙動を表現するための異種粒子間の簡易付着力モデル, 58(7) 354-366 2021年7月10日

6.        Kizuku Kushimoto, Kaya Suzuki, Shingo Ishihara, Rikio Soda, Kimihiro Ozaki, Junya Kano, Development of Simpler Coarse-Grain Model for Analyzing Behavior of Particles in Fluid Flow, Processes 9(7) 1098-1098 2021年6月24日

7.        Shingo Ishihara, Tetsu Takemasa, Katsuaki Suganuma, Junya Kano, Analysis of the formation mechanism of coarse-dense structure of silver paste in die bonding, Advanced Powder Technology 32(6) 2020-2028 2021年6月

8.        Koichi Takahashi, Aya Yoshino, Taihei Nouchi, Junya Kano, Shingo Ishihara, Tatsuro Ariyama, Modeling of Coke Particle Breakage in Blast Furnace Considering Pore Structure by Discrete Element Method, ISIJ International 61(5) 1488-1497 2021年5月15日

9.        Rikio Soda, Shingo Ishihara, Kizuku Kushimoto, Junya Kano, Kimihiro Ozaki, Single-particle crush test for ultrafine particles and direct numerical simulation of fracture process, Powder Technology 384 387-401 2021年5月

10.    Jumpei Kawamura, Kizuku Kushimoto, Shingo Ishihara, Junya Kano, Development of a new model for representing elastoplastic deformation and fracture behaviors of solid fats, Advanced Powder Technology 32(3) 963-973 2021年3月

11.    Takahiro Kozawa, Kayo Fukuyama, Kizuku Kushimoto, Shingo Ishihara, Junya Kano, Akira Kondo, Makio Naito, Effect of ball collision direction on a wet mechanochemical reaction, Scientific Reports 11(1) 2021年1月

12.    Kizuku Kushimoto, Mika Moriyama, Atsuko Shimosaka, Yoshiyuki Shirakawa, Jusuke Hidaka, Shingo Ishihara, Junya Kano, Measurement method for dispersion states of filler particles in particulate composite materials by macroscopic permittivity, Advanced Powder Technology 32(1) 272-282 2021年1月

13.    Shingo Ishihara, Kizuku Kushimoto, Junya Kano, Analysis of the Effect of Ventilation Bars on the Packing Structure of Sinter Bed by DEM Simulation, Energies 13(15) 3836-3836 2020年7月27日

14.    Ko-ichiro Ohno, Hirokazu Konishi, Takashi Watanabe, Shingo Ishihara, Shungo Natsui, Takayuki Maeda, Kazuya Kunitomo, Effect of Pre-reduction Degree on Softening Behavior of Simulant Sinter Iron Ore, ISIJ International 60(7) 1520-1527 2020年7月15日

15.    Shingo Ishihara, Ko-ichiro Ohno, Hirokazu Konishi, Takashi Watanabe, Shungo Natsui, Hiroshi Nogami, Junya Kano, Prediction of Softening Behavior of Simulant Sinter Ore by ADEM-SPH Model, ISIJ International 60(7) 1545-1550 2020年7月15日

16.    Shingo Ishihara, Junya Kano, Development of ADEM-SPH Coupling Model for Analysis of Solid to Liquid Phase Transition Behaviors, ISIJ International 60(7) 1469-1478 2020年7月15日

17.    近藤 光, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男, 遊星ボールミルによる液中粉砕結果とDEMシミュレーションにより算出した衝突エネルギー分布との関係, 粉体工学会誌 57(4) 176-183 2020年4月10日

18.    Kizuku Kushimoto, Shingo Ishihara, Samuel Pinches, Mitchell L. Sesso, Shane P. Usher, George V. Franks, Junya Kano, Development of a method for determining the maximum van der Waals force to analyze dispersion and aggregation of particles in a suspension, Advanced Powder Technology  2020年4月

19.    Shungo Natsui, Kazui Tonya, Hiroshi Nogami, Tatsuya Kikuchi, Rysuke O. Suzuki, Ko-ichiro Ohno, Sohei Sukenaga, Tatsuya Kon, Shingo Ishihara, Shigeru Ueda, Numerical study of binary trickle flow of liquid iron and molten slag in coke bed by smoothed particle hydrodynamics, processes 8(2) 221 2020年2月

20.    高橋功一, 吉野絢, 野内泰平, 加納純也, 石原真吾, 有山達郎, 気孔構造を考慮した離散要素法による高炉内コークス破壊現象のモデル化, 鉄と鋼 105(12) 1108-1117 2019年12月

21.    近藤光, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男, 液中転動ボールミルの粉砕結果とDEMシミュレーションにより算出した衝突エネルギー分布との関係, 粉体工学会誌 56 608-614 2019年11月

22.    河村順平, 久志本築, 石原真吾, 加納純也, 食品粉体の流動挙動を支配する因子の探索と簡易付着力モデルシミュレーション, 粉体工学会誌 56 598-607 2019年11月

23.    Shingo Ishihara, Kozo Shinoda, Junya Kano, Mechanochemical Treatment to Remove Arsenic from Copper Ore, Minerals 9(6) 349-349 2019年6月

24.    Kizuku Kushimoto, Shingo Ishihara, Junya Kano, Development of ADEM-CFD model for analyzing dynamic and breakage behavior of aggregates in wet ball milling, Advanced Powder Technology 30(6) 1131-1140 2019年6月

25.    Shingo Ishihara, Junya Kano, ADEM Simulation for Analysis of Particle Breakage of Irregular Shaped Particles, ISIJ International 59(5) 820-827 2019年5月

26.    渡邊亮, 久志本築, 石原真吾, 加納純也, 離散要素法における粒子摩擦係数および転がり摩擦係数の決定法, 粉体工学会誌 56(4) 218-225 2019年4月

27.    近藤光, 石原真吾, 久志本築, 小澤隆弘, 加納純也, 内藤牧男, 液中転動ボールミルの粉砕結果とDEMシミュレーションによるボール挙動の分析との整合性の検討, 粉体工学会誌 56 148-155 2019年3月

28.    小野宏輔, 久志本築, 石原真吾, 加納純也, 離散要素法による金属粉粒体の変形挙動シミュレーションの開発, 粉体工学会誌 56(2) 58-65 2019年2月

29.    久志本築, 森山美果, 下坂厚子, 白川善幸, 日高重助, 石原真吾, 加納純也, 巨視的誘電率による微粒子複合材料中の微粒子分散状態の計測, 粉体工学会誌 56(1) 4-14 2019年1月

30.    Shungo Natsui, Shingo Ishihara, Tatsuya Kon, Ko ichiro Ohno, Hiroshi Nogami, Detailed modelling of packed-bed gas clogging due to thermal-softening of iron ore by Eulerian–Lagrangian approach, Chemical Engineering Journal 392 2019年

31.    久志本築, 石原真吾, 加納純也, 湿式ボールミリングにおける媒体ボール間の砕料粒子挙動の解析, 粉体および粉末冶金 65(10) 664-672 2018年10月

32.    Renata Khasenova, Sergey Komarov, Shingo Ishihara, Junya Kano, V. Yu, Zadorozhnyy, Discrete element method simulations of mechanical plating of composite coatings on aluminum substrates, Surface and Coatings Technology 349(15) 949-958 2018年9月

33.    石原真吾, 久志本築, 加納純也, 内藤牧男, ADEMシミュレーションによる粉体圧縮成形における粉化・圧密挙動の解析, 粉体工学会誌 55(9) 492-498 2018年9月

34.    池尾陽作, 米澤敏男, 加納純也, 石原真吾, 連続遊星ミルによる再生細骨材製造における消費動力の推定, 廃棄物資源循環学会論文誌 28 68-75 2017年4月

35.    Michinori Yamamoto, Shingo Ishihara, Junya Kano, Evaluation of particle density effect for mixing behavior in a rotating drum mixer by DEM simulation, ADVANCED POWDER TECHNOLOGY 27(3) 864-870 2016年5月

36.    山本通典, 石原真吾, 加納純也, DEMシミュレーションを用いた回転ドラムにおける粒子形状が混合に及ぼす影響評価, 粉体工学会誌 52(8) 445-452 2015年8月

37.    石原真吾, 張 其武, 加納純也, ADEMによる粒子破壊過程のシミュレーション, 粉体工学会誌 51(6) 407-414 2014年6月

38.    Shingo Ishihara, Junya Kano, Modelling and DEM Simulation of the Granulation and the Grinding, TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN 100(11) 795-801 2014年

39.    山本通典, 石原真吾, 加納純也, 高速粉体混合装置の羽根形状が混合に及ぼす影響, 粉体工学会誌 50(12) 851-856 2013年12月

40.    Shingo Ishihara, Rikio Soda, Qiwu Zhang, Junya Kano, DEM Simulation of Collapse Phenomena of Packed Bed of Raw Materials for Iron Ore Sinter during Charging, ISIJ INTERNATIONAL 53(9) 1555-1560 2013年

41.    山根圭司, 石原真吾, 曽田力央, 加納純也, 齋藤文良, 棒状粒子ふるい分け挙動のDEMシミュレーション, 粉体工学会誌 49(11) 818-826 2012年11月

42.    石原真吾, 曽田力央, 加納純也, 齋藤文良, 山根圭司, 転動ミルにおける自生粉砕過程のDEMシミュレーション, 粉体工学会誌 48(12) 11-15 2011年12月

アンドレイ（Andrey Stephan Siahaan）

交通アクセス

研究機関東北大学
未来科学技術共同研究センター（NICHe)
所在地〒980-8579
宮城県仙台市青葉区荒巻字青葉6-6-10
未来産業技術共同研究館
101号
電話番号
022-795-4316
東北大学未来科学技術共同研究センター